SIMAGIC P2000 Hydraulic Load Cell Sim Racing Pedals (100/200kg, 2 or 3-Pedal)

The SIMAGIC P2000 is the top of SIMAGIC’s pedal range, a fully hydraulic, load-cell-based pedal set engineered to bring genuine motorsport braking feel into your rig. Where most pedals put a load cell only behind the brake, the P2000 uses load cell sensing on all three pedals, so throttle, brake, and clutch each read pressure with precision rather than relying on simple angle sensors. The result is consistency, repeatability, and a connection to the car that translates directly into more predictable lap times.

The heart of the P2000 is its hydraulic brake. Instead of a pure spring or elastomer stack, the brake uses a real hydraulic system: a main pump paired with an auxiliary (slave) pump, connected by braided steel lines. This split-brake structure delivers a 1:1 real brake lever feel, with a progressive, firm response that mirrors a genuine race car. The auxiliary pump can be mounted freely, with no angle or position restrictions, so it fits a wide range of rigs. A reinforced design with a larger cylinder and optimized oil path keeps the dead zone at 1mm or less for immediate, accurate response under load.

Every pedal is built around a 3-in-1 cylinder that combines spring, damper, and adjustment in a single compact unit. That makes the P2000 deeply tunable: pedal force, angle, throttle travel, and damping are all adjustable, and an included set of four brake springs (plus elastomers) lets you shape the brake curve from soft and progressive to hard and race-firm. SIMAGIC’s Segment Feel adds an adjustable step simulation for extra realism, letting you feel defined stages in the brake travel. All of this is machined from CNC aluminum on full bearings for smooth, silent, long-lasting motion.

Setup is quick and intelligent. Smart one-touch auto calibration detects whether the pedals are connected to a PC or a SIMAGIC wheelbase and configures itself accordingly. High-resolution 12-bit (4096-step) sensors capture every input, and the whole set is pre-configured out of the box for a realistic, race-inspired experience, so you can drive first and fine-tune later. All tuning lives in SimPro Manager, where you set deadzones, linearity (output curves), and save profiles that apply across every sim automatically.

This listing lets you build the exact P2000 you want along two axes. The first is brake load cell rating: 100kg suits most drivers and delivers strong, realistic braking without demanding extreme leg force, while 200kg is aimed at experienced drivers chasing the highest, most physical braking pressure, closer to real GT and formula braking loads. The second is pedal count: the 3-pedal set adds a clutch for manual and H-pattern shifting, rally, and road-car driving, while the 2-pedal set (throttle and brake) keeps things clean and compact for formula, GT, and sequential or paddle-shift racing. All four configurations share the same hydraulic brake, load cell sensing, CNC aluminum build, and adjustability, so you are only choosing braking force and layout, not compromising on quality.

Every version in this listing uses the standard (short-travel) throttle plate. If you prefer a longer throttle throw closer to a road car, the P-L200 Long Throttle Plate is available as an accessory. The P2000 is PC compatible and connects directly to a PC over USB or to a SIMAGIC wheelbase, and it is backed by SIMAGIC’s 24-month manufacturer warranty. It also anchors a full ecosystem of upgrades, from haptic pedal reactors to load cell upgrades and heel accessories, so the set grows with your skill and your rig.

Compatible Accessories

• C-P2000 Pedal Clutch: Standalone clutch pedal. Adds a third pedal to a 2-pedal set (or serves as a spare), for manual, H-pattern, and rally driving.
• P-S200 200KG Load Cell Sensor: Brake load cell upgrade to 200kg, for drivers who want the highest, most physical braking pressure.
• P-S100 100KG Load Cell Sensor: 100kg brake load cell (replacement or to set a lighter braking range).
• P-HPR Haptic Pedal Reactor: Linear-motor haptic module that adds vibration feedback (ABS, lockup, traction loss, road texture) to a pedal. Requires the P-APS power supply.
• P-HPR GT Haptic Pedal Reactor: GT-tuned version of the haptic reactor for a different, stronger feedback profile. Requires the P-APS power supply.
• P-APS Peripheral Power Supply: External power source required to run the haptic modules. One P-APS can power multiple modules at once.
• PA-V1 Peripheral Adapter: Adapter for connecting peripheral modules and power to the pedal set.
• P2000 Haptic Bracket: Mounting bracket to attach a haptic reactor module to the P2000.
• P-L200 Long Throttle Plate: Longer throttle face for more throttle travel and a road-car style throw (turns the standard S feel toward the L configuration).
• P-L201 Side Throttle Plate: Alternate side-oriented throttle plate for different foot positioning and ergonomics.
• P-C200 Carbon Fiber Heel Riser: Carbon-fiber heel plate that supports and raises the heel for comfort and consistent foot placement.
• P-F268 Heel Stop: Adjustable heel stop bar that braces the foot and sets a repeatable heel position; slides to different mounting holes.
• P-PSL Pedal Stop Collar: Travel limiter collar that caps pedal stroke for a shorter, firmer throw.
• Power Supply for P1000/P2000: SIMAGIC peripheral power supply compatible across P1000 and P2000 add-on modules (used with haptics and lighting modules).