SIMAGIC P700 Load Cell Pedals

The SIMAGIC P700 is the most capable pedal SIMAGIC has ever built at this price point. Engineered for drivers who want real performance without the premium price tag, the P700 brings a dual-sensor brake system, deep mechanical adjustability, and haptic expansion support into a compact, all-metal package ready for floor or rig mounting.

Full-Range Adaptive Sensing & Consistent Feel Across the Entire Pedal Travel

Most entry-level pedals use fixed signal amplification, which means light brake inputs get lost in noise while maximum force risks signal compression. The P700 solves this with Full-Range Adaptive Sensing Technology: the system calibrates to your actual braking window and dynamically applies the correct amplification at every force level. The result is a brake pedal that feels predictable and linear from feather-light trail braking all the way to maximum ABS pressure.

Dual Sensor Brake System

The P700’s brake pedal uses two sensors working in parallel. The 150kg load cell reads applied force and mirrors how real hydraulic brakes behave — the harder you press, the more braking force, independent of travel. The Hall-effect angle sensor reads pedal position, making the P700 equally at home in floor-mounted configurations with softer elastomers where travel-based input feels more natural. You get both, without compromise.

35 Brake Elastomer Settings

From a long-travel passenger car feel to the short, stiff bite of a TCR or GT4 setup, the P700’s quick-change elastomer system covers the full spectrum. Five elastomer configurations are pre-mapped to real vehicle types (Passenger Car, Sports Car, Toyota 86 feel, TCR, and GT4) so you can dial in pedal feedback that matches what you’re actually driving in-sim.

All-Metal Construction

The P700’s frame is built entirely from high-strength steel, rated to handle upward of 200kg of pedal force without flexing. There’s no plastic flex or cheap pivot points here. The silicone heel plate is machined in to eliminate the usual bare-metal footrest discomfort, whether you drive with shoes or barefoot.

Full Ergonomic Adjustability

Three adjustment axes let you fit the P700 to your exact seating position: pedal face angle (tilt forward or back), pedal height, and module spacing between pedals. Whether you’re on a flat floor board or a canted sim rig plate, the P700 adapts to you, not the other way around.

Haptic Module Ready

The P700 is pre-wired and fully compatible with SIMAGIC’s P-HPR and P-HPR GT linear haptic reactors (sold separately). Mount them and configure ABS vibration, wheel slip, gear shift feedback, and half-clutch engagement through SimPro Manager. It’s the single most cost-effective path to tactile pedal feedback in the SIMAGIC ecosystem.

Flexible Mounting

Carpet spikes and rubber anti-slip feet are included for floor use out of the box. An optional wall mount (P700-WM) is available for more permanent home setups. The P700 is also fully compatible with standard 8020 profile sim rigs and supports inverted mounting.

Optional Clutch Pedal

The P700 ships as a two-pedal set (brake and throttle). The C-P700 Clutch pedal is available separately for drivers who need a three-pedal configuration.