No products in the cart.
$2,764.00
Asetek Racing La Prima Direct Drive Wheelbase 12Nm
Asetek Racing La Prima Wheelbase Boost Kit (16Nm)
Asetek Racing Forte GT Button Box (Black, Aluminum)
Asetek Racing Closed D Black Leather Rim
Asetek Racing Forte Sim Racing Pedals (Brake & Throttle)
Asetek Racing La Prima Clutch System
Software and Platform
Asetek RaceHub is used to update firmware and set up every device in the bundle, from force feedback, steering range and profile presets to button mapping, LED behavior and pedal calibration.
This Asetek Racing bundle combines the La Prima 12Nm direct drive wheelbase with the La Prima Boost Kit, which raises it to 16 Nm, and pairs it with the Forte GT Button Box, the Closed D Black Leather Rim, the Forte brake and throttle pedals and the La Prima Clutch System. Compared with the La Prima GT bundle, it adds more torque, the higher-spec Forte GT Button Box with more controls and lighting, and a flat-bottom rim that frees up leg room in the cockpit. It is aimed at GT and road car drivers who want a stronger, more detailed La Prima setup with a full three-pedal layout from day one.
With the Boost Kit installed, the La Prima delivers 16 Nm of peak torque with a slew rate enhanced to 6.7 Nm/ms, while its 22-bit encoder resolves about 4,000,000 steps per revolution. The Forte GT Button Box carries 8 push buttons, 2 two-way toggle switches, 2 seven-way Kinky switches, 3 twelve-position rotary encoders, 4 thumb encoders and 2 contactless magnetic shifter paddles, plus 32 aRGB LEDs for rev lights, flags and controls. The Forte brake uses the two-stage M.L.C.P.C. load cell system with up to 180 kg of force at the pedal plate, and the throttle and clutch use contactless 16-bit Hall sensors.
The Forte GT Button Box pairs Invicta anodized aluminum buttons and encoders with a laser-etched forged carbon exterior and a 2 mm woven carbon fiber face plate, and the 328 mm Closed D rim uses hand-stitched leather perforated on the grips. The Boost Kit is plug and play, and the Asetek Racing Quick Release carries data and power to the wheel with no cables or batteries. The clutch slides onto the Forte pedal base with two screws and a small connector, and the wheelbase USB ports act as the hub for the pedals. Everything is configured in RaceHub. Please note a cockpit or wheel stand is sold separately, and the bundle works on PC (Windows 10 or 11) only.
