The SIMAGIC P1000 is not a single product, it is a platform. Every version shares the same core engineering: CNC-machined aluminum alloy construction, anodized pedal plates, 12-bit (4096-point) resolution sensors, a 100kg load cell on the brake (Hall angle sensor also supported and freely interchangeable), full adjustability of pedal spacing, height, travel, pitch angle, and spring force, and a quick-fit profile mounting plate with integrated wiring box. SIMAGIC rates the pedal mechanism to withstand over 200,000 pedal strokes without failure.<\/p>\n
What changes between models is how the brake resistance, pedal orientation, and pedal count are built. Three independent options define the lineup: hydraulic brake (included or available as an optional add-on), inverted mounting (pedals pivoting from the top rather than the floor), and pedal count (two-pedal Formula layout or three-pedal standard layout with clutch). Combined, these options produce the six models below.<\/p>\n
P1000<\/strong>: The base configuration. Three pedals (throttle, brake, clutch), floor-mounted (non-inverted), load cell brake sensor. Hydraulic brake is not included but can be added later via the optional P-HYS or P-ORP hydraulic upgrade modules, since the platform is modular by design. This is the starting point for drivers who want SIMAGIC’s full sensor and build quality without paying for hydraulics or inversion up front.<\/p>\n P1000-RS<\/strong>: Identical 3-pedal, floor-mounted layout as the standard P1000, but the hydraulic brake cylinder is included from the factory. Hydraulic resistance reproduces the damping and rebound of a real car’s brake system far more closely than a spring or elastomer alone, giving a firmer, more progressive pedal feel under heavy braking. This is the configuration most drivers moving up from spring-based pedals notice immediately, particularly for trail braking consistency.<\/p>\n P1000i<\/strong>: Three pedals with inverted mounting. Instead of pivoting from the floor, the pedals pivot from the top of the unit, the same way pedals are mounted in most real production and race cars. This changes ankle and leg mechanics, many drivers find it reduces fatigue and improves long-session consistency. No hydraulic cylinder included, load cell brake as standard. The inverted frame is physically taller (348 x 489.8 x 368.5mm) than the floor-mounted P1000, since the pedal assembly extends upward rather than sitting flat.<\/p>\n P1000i-RS<\/strong>: Combines inverted mounting with the included hydraulic brake cylinder. This is the most complete realism configuration in the lineup, authentic pedal geometry paired with authentic hydraulic resistance. It is also the heaviest and tallest model (8.50kg, 348 x 489.8 x 368.5mm) due to the combination of the inverted frame and the hydraulic assembly.<\/p>\n P1000-F<\/strong>: The Formula-style two-pedal layout, throttle and brake only, no clutch, since open-wheel and Formula-style cars do not use one. Floor-mounted, load cell brake, no hydraulic cylinder included. Smaller and lighter (4.65kg) than the 3-pedal models since there is no clutch assembly to house.<\/p>\n P1000-FRS<\/strong>: The same 2-pedal Formula layout as the P1000-F, with the hydraulic brake cylinder included. The lightest hydraulic-equipped model in the range (5.00kg), built for drivers who run open-wheel rigs and want hydraulic braking without the size and weight of the 3-pedal RS units.<\/p>\n A note on combinations that do not exist as standalone products: there is no inverted Formula model sold as a complete unit (no “P1000i-F”). Inverted mounting (the i designation) is only offered as a factory configuration on the 3-pedal layout. If a Formula-layout customer wants inverted mounting, the P1000 Inversion Kit (sold separately, compatible with P1000, P1000-F, and P1000-FRS) can be added after purchase, but it does not ship as a pre-assembled SKU.<\/p>\n P1000: 3 pedals, floor-mounted, no hydraulic <\/p>\n <\/p>\n <\/p>\n P-HPR \/ P-HPR GT Haptic Pedal Reactor: adds vibration feedback under braking and acceleration.<\/p>\n P-HYS Hydraulic Brake Module: upgrades any non-RS model to hydraulic braking after purchase (compatible with P1000, P1000-F, P1000-FRS). P-HYSi is the equivalent module for inverted models.<\/p>\n P-ORP \/ P-ORP(H) Brake Elastomer Springs: adjust brake feel and resistance, separate part numbers for hydraulic and non-hydraulic models.<\/p>\n P1000 Inversion Kit: converts a floor-mounted P1000, P1000-F, or P1000-FRS to inverted mounting after purchase.<\/p>\n P-1000 Clutch Pedal: adds a third (clutch) pedal to any 2-pedal Formula model.<\/p>\n P-1000 Long Throttle Pedal Plate, P-SFP \/ P-FFP Flat Pedal: alternate pedal face geometry.<\/p>\n P-HTS Hydraulic Throttle Module: extends hydraulic feel to the throttle pedal.<\/p>\n P-SRH (Sim Ray Heel Stop), P-SRB (Sim Ray Bar): rig-mounted accessories.<\/p>\n P-APS Peripheral Power Supply: required to power any of the above optional modules. Only one P-APS unit is needed even when running multiple accessories simultaneously.<\/p>\n <\/p>\n Every P1000 model connects to a PC via USB or directly to a SIMAGIC wheelbase via the side CAN-Bus port, switchable with a physical button on the control box (blue indicator for CAN-Bus mode, green for USB mode). A separate Independent Power Supply connection is required only when running optional modules such as the P-HPR, P-SRH, or P-SRB.<\/p>\n","protected":false},"excerpt":{"rendered":" Le SIMAGIC P1000 est un ch\u00e2ssis de p\u00e9dales modulaire usin\u00e9 CNC \u00e0 loadcell, construit autour d'un capteur de frein de 100 kg et de capteurs d'acc\u00e9l\u00e9rateur\/embrayage \u00e0 effet Hall 12 bits. Il est vendu en six configurations, combinant freinage hydraulique, montage invers\u00e9 des p\u00e9dales et configurations \u00e0 deux ou trois p\u00e9dales, afin que vous puissiez obtenir la sensation de p\u00e9dale exacte et la g\u00e9om\u00e9trie de travail du pied correspondant \u00e0 votre simulateur et \u00e0 votre style de conduite.<\/p>","protected":false},"featured_media":436508,"template":"","meta":{"_acf_changed":false},"product_brand":[334],"product_cat":[477],"product_tag":[],"class_list":["post-436494","product","type-product","status-publish","has-post-thumbnail","product_brand-simagic","product_cat-pedals-en","first","instock","sale","featured","taxable","shipping-taxable","purchasable","product-type-variable"],"bundled_by":[],"bundle_stock_status":"instock","bundle_stock_quantity":null,"bundle_virtual":false,"bundle_layout":"","bundle_add_to_cart_form_location":"","bundle_editable_in_cart":false,"bundle_sold_individually_context":"","bundle_item_grouping":"","bundle_min_size":"","bundle_max_size":"","bundle_price":[],"bundled_items":[],"bundle_sell_ids":[],"acf":[],"_links":{"self":[{"href":"https:\/\/www.noxgaming.ca\/fr\/wp-json\/wp\/v2\/product\/436494","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.noxgaming.ca\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.noxgaming.ca\/fr\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.noxgaming.ca\/fr\/wp-json\/wp\/v2\/media\/436508"}],"wp:attachment":[{"href":"https:\/\/www.noxgaming.ca\/fr\/wp-json\/wp\/v2\/media?parent=436494"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.noxgaming.ca\/fr\/wp-json\/wp\/v2\/product_brand?post=436494"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.noxgaming.ca\/fr\/wp-json\/wp\/v2\/product_cat?post=436494"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.noxgaming.ca\/fr\/wp-json\/wp\/v2\/product_tag?post=436494"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}Quick Reference: Which P1000 Is Which<\/h4>\n
\nP1000-RS: 3 pedals, floor-mounted, hydraulic included
\nP1000i: 3 pedals, inverted, no hydraulic
\nP1000i-RS: 3 pedals, inverted, hydraulic included
\nP1000-F: 2 pedals (Formula), floor-mounted, no hydraulic
\nP1000-FRS: 2 pedals (Formula), floor-mounted, hydraulic included<\/p>\nOptional Accessories (Compatible Across the Lineup)<\/h3>\n
Compatibility and Connection<\/h3>\n